لدي سترونج 4800 واريد تطويره طريقة التطوير مكتوبة بالغة الانجليزية وهي كالتالي
SRT 4800
Please download and save the three following files in a directory of your choice:
Flash.exe
stro159c1.bin
sistxddx.bin
Go to the Ms Dos Window of Win 95 or 98
Prepare a RS-232C line and connect your PC to the receiver
(Pin2 and 3 in the RS-232C line should be twisted)
side 1 side 2
pin 2 pin 3
pin 3 pin 2
Turn off AC power or plug out AC power line
To upgrade the unit's software
Go to the directory where you have saved the 3 files and type:
Flash stro159c1.bin COM1 (or COM2) and press enter.
The message "Try to make connection" will be displayed
Turn on AC power or plug in AC Power line
You will see "r1", "r2", "r3" ....."rxxx" on the front panel LED and finally "SUCC" if downloading is finished successfully.
Turn off AC power
To download the updated factory default satellite data:
Type Flash sistxddx.bin COM1 (or COM2)
NB: This will erase your existing channel list and require a new satellite scan. If you wish to proceed, carry out the following steps:
and press enter.
The message "Try to make connection" will be displayed
Turn on AC power
You will see "r1", "r2", "r3" ....."rxxx" on the front panel LED and finally "SUCC" if downloading is finished successfully.
Turn off and on AC power to use the receiver
ارجو ممن لديه خبرة في اللغة المساعدة في الترجمة بشكل جيد
SRT 4800
Please download and save the three following files in a directory of your choice:
Flash.exe
stro159c1.bin
sistxddx.bin
Go to the Ms Dos Window of Win 95 or 98
Prepare a RS-232C line and connect your PC to the receiver
(Pin2 and 3 in the RS-232C line should be twisted)
side 1 side 2
pin 2 pin 3
pin 3 pin 2
Turn off AC power or plug out AC power line
To upgrade the unit's software
Go to the directory where you have saved the 3 files and type:
Flash stro159c1.bin COM1 (or COM2) and press enter.
The message "Try to make connection" will be displayed
Turn on AC power or plug in AC Power line
You will see "r1", "r2", "r3" ....."rxxx" on the front panel LED and finally "SUCC" if downloading is finished successfully.
Turn off AC power
To download the updated factory default satellite data:
Type Flash sistxddx.bin COM1 (or COM2)
NB: This will erase your existing channel list and require a new satellite scan. If you wish to proceed, carry out the following steps:
and press enter.
The message "Try to make connection" will be displayed
Turn on AC power
You will see "r1", "r2", "r3" ....."rxxx" on the front panel LED and finally "SUCC" if downloading is finished successfully.
Turn off and on AC power to use the receiver
ارجو ممن لديه خبرة في اللغة المساعدة في الترجمة بشكل جيد
تعليق