الذى يريد يورستاروطريقة توصىله التوالى
Procedure how to download the software:
1. Connect the RS232 cable from your "Computer Port" and the "receiver RS232 port". Make sure the receiver and your PC have the communications.
RS232 Cable Wire connection:
Pin 2 <----------------connect to---------------->Pin 3
Pin 3 <----------------connect to---------------->Pin 2
Pin 5 <----------------connect to----------------->Pin 5
Note: هذه تو صيله التوالى
Open the RS232 cable and follow the connection above. To test if the cable is correct after you connect from your PC and the receiver. Open the 8800ADP+2CI.ht folder. After you open power "ON" your receiver then you can see a running message from the screen. If there is no messages coming check your RS232 cable connection and if it is ok go to number 5 procedure, If it is not ok then your receiver was corrupted. Then go to number 2 procedure.
2. Plug <OFF> your receiver and wait for 6 seconds.
3. Press <MENU> and <EXIT> buttons(together) on the front panel of your receiver. Keep pressing and plug <ON> your receiver and wait for 3 seconds then release buttons.
4. Now the receiver is in boot mode.
============================================================
5 Open the <Itlink1.exe> icon.
6. Select which communication port you connected your RS232 cable.
7. After selecting the communication port click <Browse> then find the data <Latest_eu640_010530.elf> then click <Open>
8. Now click <Start>
9. If downloading was completed wait for 15 seconds to save the data then everything is ok.
10. If you fail to download "please try again". Then If you fail to download 4x then proceed No. 11
----------End-----------
11. Now if the procedure above is not working it means that your receiver was totally corrupted and needs for repair.
Eurostar cannot be held liable for any equipment failure resulting
from downloading the provided software.
Regards,
Engineering Department
1. Connect the RS232 cable from your "Computer Port" and the "receiver RS232 port". Make sure the receiver and your PC have the communications.
RS232 Cable Wire connection:
Pin 2 <----------------connect to---------------->Pin 3
Pin 3 <----------------connect to---------------->Pin 2
Pin 5 <----------------connect to----------------->Pin 5
Note: هذه تو صيله التوالى
Open the RS232 cable and follow the connection above. To test if the cable is correct after you connect from your PC and the receiver. Open the 8800ADP+2CI.ht folder. After you open power "ON" your receiver then you can see a running message from the screen. If there is no messages coming check your RS232 cable connection and if it is ok go to number 5 procedure, If it is not ok then your receiver was corrupted. Then go to number 2 procedure.
2. Plug <OFF> your receiver and wait for 6 seconds.
3. Press <MENU> and <EXIT> buttons(together) on the front panel of your receiver. Keep pressing and plug <ON> your receiver and wait for 3 seconds then release buttons.
4. Now the receiver is in boot mode.
============================================================
5 Open the <Itlink1.exe> icon.
6. Select which communication port you connected your RS232 cable.
7. After selecting the communication port click <Browse> then find the data <Latest_eu640_010530.elf> then click <Open>
8. Now click <Start>
9. If downloading was completed wait for 15 seconds to save the data then everything is ok.
10. If you fail to download "please try again". Then If you fail to download 4x then proceed No. 11
----------End-----------
11. Now if the procedure above is not working it means that your receiver was totally corrupted and needs for repair.
Eurostar cannot be held liable for any equipment failure resulting
from downloading the provided software.
Regards,
Engineering Department
