عزيزي ماذا تقصد ب مضروب؟

اذا كان طايح او مضروب بمعنى الكلمة فقل وداعاً للكام لان ما حصل معك حصل معي من قبل .وحاولت ولكن بدون فائدة الى ان يأست ورميته

سلام

عزيزي المعنى هو

يعني المضروب ليس طايح ولكن انضرب اثناء البرمجة

IRDETO CI - changing sw of module
(28.08.1999)

What we need?
- Nokia Mediamaster 96XX with SCSI connector
- PC with MS Windows and SCSI card and cable
- DVB2000 >=1.75.3
- VGrabber >=6.9
- SBR Files with sw to upload to CI (use SBR files - not sometimes included BIN)


How to?

Be carefull - you only have one try - if something fail CAM will be dead!

For test if your SCSI connection is ok try upload new DVB2000 usng VGrabber! If everything went ok we can try to change sw in IRDETO CI module!
Step by step:
- run VGrabber
- go to SCSI Action - Code Upload - Upload Subroutine
- select SBR file to upload to module
- press OK
After a while on TV screen you should see running counter which stops from time to time. Do Not do anything with PC (vgrabber)/Remote/MM as long as you see counter on the screen. This most dengerous moment in whole upload proccess. After the counter disappear from tv. You can switch off your MM or reinit CAM (in CAM menu). In my case it took 2 minutes!


There two type of All cam files:
03 all CAM - works with DVB2000 from v1757 also with Humax, Galaxis and should with other CI compilant/ auto detect of card type
04 all CAM - works only with DVB2000 (have secret menu)
______________________
المصــدر : http://sat-digital-tv.provider.com.pl/starte.htm

شكر

اشكرك اخي موفق